Ridiculously Tiny Goldwork Couching

Well, as the days start getting shorter, it's the time to make the most of all that natural daylight we've got left. Especially when I'm taking my goldwork or nue to new and somewhat ridiculous levels. As I blogged previously, I drew out the Budweiser beer label to start couching, only to find that two strands held together proved too thick. To get the detail I wanted, the only way was to re-commence the embroidery using ONE starnd of the red metallic thread to couch over at a time.

Considering that the red metallic thread is less than a mm wide, this took a LOT of patience. One inch high has 29 parallell rows. Yes, 29 rows covered vastly by tiny white couching stitches. Keep your hands clean (white's a pain to work with on such a scale as this) and stop every so often to put your eyes back in their sockets.

Budweiser WIP: some reconsiderations

Another alcohol bottle label has been started, but alas, I have been forced to stop and reconsider this particular piece. The label is 'Budweiser' beer, and began well as usual: the original design traced out onto fabric, ready for the lines of metal thread to be couched over.

Now, the red metallic thread I'm using is exceptionally thin (much more so than the gold and silver passing I usually couch over.) So, I thought I could 'get away' with using two strands held down together. The result is below - yes, it works, and the logo is still legible: however, I'm just not happy about the (lack of) detail achieved. The solution would be to enlarge the logo, but as the labels must remain their original size in order to be glued back onto the bottles at a later stage, this isn't an option.
My decision? To start the entire thing again - this time using only one strand per line - hopefully the smoothness in the curves of the lettering will justify the extra time!

The very lowest two rows were done in this way, with only one strand, to prove my point to myself that it did indeed look far better.

Goldork Or Nue Cider label WIP

More new or nue.... I haven't been doing any of this for quite a while. But 3 months of hell are coming to an end and I have to work out how to re-engage with myself and my stitch practice. I go back to work tomorrow after 6 weeks of being signed off and you know what? It's absolutely vital, now, that I get my portfolio processed and complete enough to start presenting. I don't want to be trapped in corporate retail any longer. Neither do I want to be trapped skiring the edges of depression again being entirely un-creative, because it's a vicious circle.

So this is the latest instalment of fiddly, obsessively intricate goldwork couching  -still inspired by the labels I absent-mindedly peel of bottles in the pub, but with the wording twisted around a little. (Look closely.) Work in Progress, of course (both the embroidery and the subject matter).

Stella Artois goldwork label WIP

Lettering, logos, and if you spend long enough staring at something – I think it starts to creep into your subconscious. Something about the elaborate design of the Stella Artois logo must have appealed to me the day I dragged the bottle back from the pub and sat it on the side in my studio, where it’s waited patiently for a good month now, awaiting its inspirational purpose. Being relatively uninventive I decided to replicate the logo entirely in or nue, a task made more challenging by the swirling gold detailing and the slight drop-shadow of the lettering itself that demanded accurate capturing.

I fully recommend surrounding yourself with inspirational items and allowing them to infiltrate your creative headspace (and I’m not simply referring to the contents of said bottle.)

(life-size: 9x10xcm)

I start by drawing out the design onto the background fabric. The couching thread here’s going to be silver, which means any other areas of colour (including all the red) must be ‘coloured in’ with dense rows of stitches. By colouring in the background in the corresponding colour, not only does it give you an accurate ‘colour by numbers’ to work from, it helps disguise any minor discrepancies: deviations where the thread doesn’t couch down quite parallel, and a tiny glimpse of background is left uncovered. Threads can pass along the back of the work but I wouldn’t recommend having them loose in this manner for more than an inch or so.

After the design has been worked, the ends are plunged through to the back: potentially the trickiest section, here. After the gold band of edging, the ideal is for the silver ends to disappear exactly where the gold stitches securing them stop, for otherwise you’ll be left with nasty silver highlights at the ends of rows where they don’t belong. There are two tricks to ensure this doesn’t happen. One: when working the edges, make them as accurate and the gold curves in as smooth a line as possible. Two: a great deal of patience in needle placement when the silver is threaded up and actually plunged.

This label isn’t finished: next stage, it requires the fine black outlining around the gold leafy swirls and the trumpet. These are far too narrow to have been worked as part of the or nue, so will be added later in backstitch over the top. Then I intend to cut out and hem the entire logo, and attatch it inconspicuously to the side of the bottle. The end result shall be a bottle that at a glance looks perfectly normal, but actually has an exquisitely embroidered label that shimmers when the curve of the bottle catches the light.
And then I’m possibly going to go and drink one to celebrate.